A walk-in fridge is the heart of every commercial kitchen. It is essential for both your inventory and all of your clients. If your walk-in is causing you problems, get to the bottom of it as soon as possible. Small problems can quickly escalate from their first phases.
A walk in cooler repair or replacement is not always an easy decision. Of course, you want to keep expenses down while yet receiving the performance you need. Maintenance can extend the life of any component of your industrial cooling system for years, up to a point.
By replacing at the appropriate time, you can save time, frustration, and money. However, if you begin it too soon, it will cost you more money and take a long time, disrupting your business. Making the right decision at the right time is dependent on several factors.
Here’s how to figure out what will work best for your company:
When Was The Walk In Cooler Repair?
Your walk-in cooler shares several characteristics with other types of refrigeration equipment. Regardless of size, it is dependent on a commercial compressor, possibly one from the Copeland two-D or three-D series. As a result, age has a substantial impact on performance.
As your walk-in appliance approaches ten years old, you should expect performance to begin to deteriorate. Most businesses will replace a machine when it is between eight and twelve years old. Mechanical degeneration, on the other hand, could induce component failure before the ten-year mark.
In this case, repairs are usually faster and less expensive. It is highly rare for a component to fail so severely that repair is costly.
Issues With Temperature
Many walk-in coolers operate at around thirty-two degrees Fahrenheit. If there are issues with maintaining a consistent temperature, the first thing to check is if the thermostat is accurately registering the temperature. The degree of refrigerant is the second most likely perpetrator.
Remember that, like a consumer freezer, your walk-in cooler repair relies on appropriate air movement to maintain a consistent temperature across the room. How you pack and arrange your food inventory can affect the temperature and energy utilization of your walk-in cooler.
Power Consumption Is Increasing Over Time
There may be no discernible difference in performance, but the cooling system consumes more energy to operate. This is usually due to the need to clean the condenser and evaporator coils. Fan maintenance and defrosting may also be beneficial with the built-in cooler.
Increased energy consumption may indicate a lack of maintenance, but it rarely indicates that the system needs to be replaced. Make sure your facility plan outlines the weekly, monthly, and yearly tasks you will need to complete to get the most out of your time there.
Carrying Out Routine Maintenance Inspections
Repairs are quicker and less expensive if the machinery is maintained. Inspect the evaporator coil once a month to ensure that it is adequate to defrost. Every six months, inspect motors and blades, tighten electrical connections, tighten caps and screws, clean the condenser coil and drain pan, and test control systems, including defrost controls.
While almost anyone can learn how to clean a driveway, keep in mind that many of the components are delicate and easily damaged. Make contact with a group of commercial refrigeration professionals. Higher maintenance costs are easily offset by the money saved by extending the life of your equipment.
When Should You Replace Your Commercial Compressor?
In addition to being completely replaced, the compressor can frequently restore your radiator to like new condition. Although replacing a compressor is an expense, it is not as time-consuming as acquiring and installing a new walk-in freezer.
The compressor is the system’s pulsing heart. If the other parts are in good working order, adding a compressor gives the system new life. Because a brand-new business compressor is uncommon, a remanufactured compressor is a sensible economical solution for both your system and your wallet.
The rebuilt supercharger was thoroughly disassembled and reassembled to meet high-performance specifications. Surfaces are cleaned and components are replaced. After reassembling the system, it is tested to ensure that it will perform reliably in actual use.
When Detecting The Problem
Whatever problems you detect with your driveway, you should act quickly. If performance issues are not addressed as soon as they arise, they will only worsen. When one portion of the system fails, the rest of the system suffers.
If the performance of your walk-in cooler suddenly deteriorates, there could be a problem that can be quickly resolved, or the entire system could fail. Request a second opinion from a reputable commercial walk in cooler repair professional. Being proactive can mean the difference between having a new component you require arrive with minimal disruption or disrupting your business.